User Access Manager Help >> Operation Guide >> User Access Policy >> Access Condition >> AP Group >> Add/Modify AP Group

Add/Modify AP Group

Perform this task to add or modify an AP group.

Operation Procedure

1. Click the User tab.
2. From the navigation tree, select User Access Policy > Access Condition > AP Group.
   
3. Click Add, or click the Modify icon for the AP group you want to modify.
4. Specify the AP group name, description, and service group.
5. Click Add in the AP List area.
6. On the Add AP page, enter the NAS ID and description for the AP you want to add to the AP group.You can also click Import to import APs in batches.
7. To remove an AP from the AP group, click the Delete icon for the AP on the AP list, or select one or more APs and click Delete, and then click OK to confirm the operation.
8. Click OK.

Precautions

• An AP group must have at least one AP. Each AP in an AP group is identified by a unique NAS ID.
• An AP can be assigned to only one AP group.
• When you modify an AP group, you cannot modify the service group to which the AP group belongs.
• The NAS ID is case insensitive.
• One AP group can contain up to 256 NAS IDs.