Network Management Essential Help >> Alarm Management >> Alarm Level Configuration >> Add/Modify Alarm Level Configuration

Add/Modify Alarm Level Configuration

Perform this task to add or modify an alarm level configuration.

Operation Procedure

1. Click the Alarm tab, and then select Alarm Level Configuration in the navigation tree. The Alarm Level Configuration page appears.
2. Click Add, or a modify link in the Alarm Level Configuration list to enter the Add Alarm Level Configuration or Modify Alarm Level Configuration page.
3. In the Add Alarm Level Configuration or ModifyAlarm Level Configuration page, do the following configurations:
   • Type the rule name (available only when adding an Level Configuration rule).
   • Select your concerned devices.
   • Select your concerned alarms.
   • elect a configuration item, and enter the configuration item value.
   • Select the alarm level that will be updated for alarms meeting the configuration item value.
4. Click OK.

Parameters

• Concerned Devices: If you select All Devices, alarms of all the devices are Concerned; if you select Selected Devices, only the alarms of the selected devices are Concerned. You can select devices in the following three ways:
  • Selected Devices: Select one or more devices that are added to The System platform.
  • Selected Custom View: Select a customized view to select all devices in this view.
  • Selected Network Segment: Enter start and end IP addresses to select the devices whose IP addresses are in the address range.
• Concerned Alarms: If you select All Alarms, all alarms are Concerned. If you select Selected Alarms, only the selected alarms are Concerned.
• Configuration items include the alarm duration (in minutes by default) and the alarm repetitions.