Add/Modify Monitor
Perform this task to add or modify a service monitor. Each type of service monitor contains two monitor indexes. If both of them are selected, two monitors with the same monitor name but different index names appear in the service monitor list.
Operation Procedure
- Click the Resource tab, and then select Performance Management > Service Monitoring from the navigation tree to display the service monitor list page.
- Click Add.
- Enter the monitor name, select a service type, and select monitor indexes.
- Enter relevant configuration parameters according to the selected service type.
- Click OK.
Parameters
- DHCP Service
- Server Address or FQDN: IP address or FQDN of the device where the DHCP service resides. This field is required.
- Client MAC Address: MAC address for which an IP address is requested to check whether the DHCP service works properly.
- Relay Agent: Optional. Enter the IP address of the DHCP relay agent server.
- DNS Service
- Server Address: IP address of the device where the DNS service resides. This field is required.
- FQDN: Fully qualified domain name (FQDN) to be resolved. This field is required.
- FTP Service
- Address: IP address of the device where the FTP service resides. This field is required.
- Port: Port number used by the FTP service. This field is required.
- Username: Username used for logging in to the FTP server.
- Password: Password used for logging in to the FTP server.
- Internet Service
- Web Address: IP address of the device where the WWW service resides. This field is required. It must start with http:// or https:// and has a maximum of 128 characters.
- Use HTTP Proxy: Specifies whether to use HTTP proxy to access the Web address.
- HTTP Proxy Address: IP address of the device enabled with HTTP proxy.
- Port: Number of the device port enabled with HTTP proxy.
- Username: Username used for logging in to the HTTP proxy server.
- Password: Password used for logging in to the HTTP proxy server.
- RADIUS Service
- Server Address: IP address of the device where the RADIUS service resides. This field is required.
- Shared Key: Shared key used for communication between the RADIUS client and RADIUS server. This field is required.
- Username: Username used for logging in to the RADIUS server. This field is required.
- Password: Password used for logging in to the RADIUS server. This field is required.
- Authentication Type: Specifies an authentication type. Options include PAP and CHAP. This field is required.
- Authentication Port: Port for authentication for login to the RADIUS server. This field is required.
- Accounting Port: Accounting port of the RADIUS server. This field is required.
- SNMP Service
- IP Address: IP address of the device enabled with the SNMP service. This field is required.
- SNMP OID: OID value of the MIB node that provides SNMP access. This field is required and can contain only numbers 0 to 9 and dots (.).
Precautions
- To perform monitoring operations, add the system server to the system when adding a service monitor.
- If you select two indexes when adding a service monitor, two service monitors are added to the service monitor list.
- You cannot add two service monitors with the same configuration parameters to one monitor index.
- When modifying a monitor, you cannot modify the monitor name, service type, or monitor index.
- Multiple monitor instances of the RADIUS type collect statistics at the same time during the 5-second lock period of the RADIUS server. To avoid conflict, do not select more than one item of the RADIUS type and always use different user information when you configure the items.
Related Topics