Platform Help >> System Management >> SMSC Settings >> Modify Modem

Modify Modem

Perform this task to modify a modem.

Procedure

1. Click the System tab, and then click the SMSC Settings link.
2. Click the Modem sending method. Select a modem network type, GSM or CDMA.
3. On the modem list, click the Modify icon for the target modem.
4. Modify the modem setting as needed.
   
5. To test the modem setting changes:

   a. Click Test to expand the Test Modem Setting area.
   b. In the Cell Phone Number field, enter a cell phone number to receive the test SMS message.
   c. Click Test and view the test result at the upper right corner of the page.

6. Click OK.

Parameters

• Connect Using: The virtual port that connects the modem to the SMSC server.
• Baudrate(bps): The communication rate between the modem and the SMSC server.
• Country Code: The code of a country or a region. You do not need to set this field for CDMA modems.
• SMSC Number: SMSC number for the card issuer of the SIM card in the modem. You do not need to set this field for CDMA modems.

Remarks

• You can modify the modem of Alarm Management on the Alarm Notification page.
• In the Test Modem Setting area, you can configure the periodic test number for the modem under test. This test is executed once a day. If no message is received, the modem is operating improperly.
• On the configuration window for the GSM modem under test, you can configure the periodic test number for the GSM modem under test. This test is executed once a day. If no message is received, the GSM modem is operating improperly.