Network Element-Level Management Help >> Basic Device Information >> Configure RADIUS Servers

Configure RADIUS Servers

This function allows you to configure RADIUS servers for an access device, including the RADIUS authentication servers, RADIUS accounting servers, and global 802.1X.

Operation Procedure

1. Select the Resource tab.
2. Select the device to be managed from the device list to enter the Device Details page.
3. Click the RADIUS Server Configuration link to enter the RADIUS Server Configuration page.
4. Type a scheme name and information such as the IP addresses of the primary servers, the shared secrets, and the domain name. Click OK.

Parameters

RADIUS Authentication Server Configuration

• Scheme Name: Name for the RADIUS scheme, a string of up to 32 characters.
• Primary Server IP: IP address of the primary authentication server. Only IPv4 addresses are supported at present.
• Primary Server UDP Port: Port number of the primary authentication server, in the range from 1 to 65535. The default is 1812.
• Secondary Server IP: IP address of the secondary authentication server. Only IPv4 addresses are supported at present.
• Secondary Server UDP Port: Port number of the secondary authentication server, in the range from 1 to 65535. The default is 1812.
• Shared Secret: Shared secret for exchanging authentication and accounting messages with the RADIUS servers. It can be a string of up to 64 characters.
• Service Type: Type of the RADIUS service, Standard or Extended.
• Username Format: Format of usernames sent to the RADIUS servers, With domain or Without domain.
• Domain Name: Name of the ISP domain, a string of up to 24 characters.

RADIUS Accounting Server Configuration

• Primary Server IP: IP address of the primary accounting server. Only IPv4 addresses are supported at present.
• Primary Server UDP Port: Port number of the primary accounting server, in the range from 1 to 65535. The default is 1813.
• Secondary Server IP: IP address of the secondary accounting server. Only IPv4 addresses are supported at present.
• Secondary Server UDP Port: Port number of the secondary accounting server, in the range from 1 to 65535. The default is 1813.

802.1X Configuration

• Global 802.1X Status: Indicates whether to enable 802.1X globally. It can be Enabled or Disabled.
• Authentication Mode: Authentication mode, CHAP, EAP, or PAP.