Wireless Service Manager Help >> Operation Guide >> Configuration Management >> Set Thresholds

Set Thresholds

Perform this task to set performance index thresholds. WSM generates alarms when the collected data exceeds the thresholds for the selected indexes.

Procedure

1. Click the Service tab, and then select Configuration Management from the WLAN Manager navigation tree to open the configuration management page.
2. Click the Threshold Configuration link in the Network Management area to open the page for setting thresholds.
3. Select the boxes for the target parameters and then enter the thresholds, or clear the configured parameters.
4. Click OK.

Parameters

• Client Count: Specifies the number of clients associated with the AP, in the range of 0 to 200. When the number of clients associated with the AP exceeds this value, alarms are generated.
• Radio Rate (%): Specifies the percentage of the rate of a radio to the supported maximum rate, in the range of 0 to 100. Alarms are generated if the collected percentage exceeds this value.
• Radio Channel Utilization (%): Specifies the channel usage threshold of a radio, in the range of 20 to 100. When the radio usage exceeds the threshold, minor alarms are generated.
• Clients Associated with AC (Minor): Specifies the number of clients associated with the AC, in the range of 1 to 49999. When the number of clients associated with the AC exceeds this value, minor alarms are generated.
• Clients Associated with AC (Major): Specifies the number of clients associated with the AC, in the range of 2 to 50000. When the number of clients associated with the AC exceeds this value, major alarms are generated.