Add/Modify Policy Template

Perform this task to add or modify a radio policy template.

Procedure

Click the Service tab.
From the WLAN Manager navigation tree, select Configuration Management to open the Configuration Management page.
Click Template Management in the Network Configuration area to open the Template Management page.
Click Radio Policy Template to open the Radio Policy Template List page.
Click Add to open the Add Radio Policy Template page. Or click the Modify icon for a radio policy template to open the Modify Radio Policy Template page.
Edit the basic information of the radio policy template.
Click OK.

Policy Name: Enter a case-insensitive string of 1 to 15 characters to uniquely identify the radio policy. The string can contain letters, digits, and underlines (_).
Beacon Interval (TU): Enter an interval for sending management frames, in the range of 32 to 8191. The default value is 100.
DTIM Interval (s): Enter a Delivery Traffic Indication Message period of message frames, in the range of 1 to 31. The default value is 1.
RTS Threshold (bytes): Enter a threshold for sending requests in bytes, in the range of 0 to 2346. The default value is 2346.
Fragment Threshold (bytes): Enter the maximum length of a data packet that is transmitted without being fragmented. It must be an even integer in the range of 256 to 2346. The default value is 2346.
Short Frame Retransmission Threshold: Enter the maximum retransmission time for frames that are not longer than RTS Threshold. The value range is from 1 to 15 and the default value is 7.
Long Frame Retransmission Threshold: Enter the maximum retransmission time for frames that are longer than RTS Threshold. The value range is from 1 to 15 and the default value is 4.
Rx Lifecycle (ms): Enter an interval at which the fit AP stores received data packets. The value range is from 500 to 250000 and the default value is 2000.
Max Clients: Enter the maximum number of clients allowed in the radio policy.