Add/Modify Policy Template
Perform this task to add or modify a service policy template.
Procedure
- Click the Service tab, and then select WLAN Manager > Configuration Management from the navigation tree to open the Configuration Management page.
- Click Template Management in the Network Configuration area to open the Template Management page.
- Click Service Policy Management to open the Service Policy Template List page.
- Click Add to open the Add Service Policy Template page. Or click the Modify icon
for the template you want to modify to open the Modify Service Policy Template page.
- Edit the basic information for the service policy template.
- Click OK.
Parameters
- SSID Name: Uniquely identifies an SSID by a string of 1 to 32 characters.
- Encryption Mode: Sets the encryption mode. Options include Clear and Crypto.
- Hidden SSID: Sets whether to hide SSID in Beacon frames. By default, this option is not selected.
- Authentication Mode: Sets the 802.11 and 802.11i authentication mode. If Encryption Mode is set to Clear, this field must be Open System. If Encryption Mode is set to Crypto, this field can be Open System (default), Shared Key, or All.
- Max Clients: Specifies the maximum number of clients allowed in the service policy.
- Layer 2 Isolation: Select whether to enable Layer 2 isolation. This feature isolates clients accessing the same SSID.
- VLAN: ID of the VLAN that clients will join after coming online through the service policy template, in the range of 1 to 4094.
- Security IE: Specifies the element of security information to be used in Beacon and Probe response frames. Options include None (default), RSN, WPA, and All. This field is available only when Encryption Mode is set to Cyphertext.
- Cipher Suite: Specifies the cipher suite to be used for data frame encryption. Options are WEP40,WEP104,WEP128, TKIP, CCMP, where WEP40 and WEP104 and WEP128should not be selected at the same time. Key Index and Key are available only when Cipher Suite is set to WEP40 or WEP104 or WEP128.
- Key Index: Specifies the index of the key. There can be four keys, indexed 1 to 4. By default, the index is 1.
- Key: A key string can only contain numbers and letters. The key length depends on the cipher suite. For a WEP40 key, the key length is 5 alphanumeric characters. For a WEP104 key, the key length is 13 alphanumeric characters. For a WEP128 key, the key length is 16 alphanumeric characters.
Related Topics