Add/Modify Message Notification Configuration
This function enables you to notify the maintenance engineer of any alarms through short messages.
Operation Procedure
- Click the Alarm tab, and then select Alarm Notification in the navigation tree. The Alarm Notification page appears.
- Click Add, or a modify link in the Message Notification list to enter the Add Message Notification Configuration or Modify Message Notification Configuration page.
- In the Add Message Notification Configuration or Modify Message Notification Configuration page, do the following configurations:
- Type the rule name (available only when adding an alarm notification rule).
- Select whether to forward alarms that match or do not match the alarm filters in the rule.
- Select Enable or Disable from the Staged Alarm Notification list.
- Type the notification stage name (available only when Enable is selected from the Staged Alarm Notification list).
- Type the telephone number.
- Type the duration of alarms before the system begins to send notifications (available only when Enable is selected from the Staged Alarm Notification list).
- Select your concerned alarm levels.
- Select your concerned resources.
- Select your concerned alarms.
- In the Time Ranges area, set the start and end time on each day in the format HH:MM. For example, 12:23–23:23.
- Click OK.
Parameters
- Staged Alarm Notification: If you select Enable from the Staged Alarm Notification list, configure Notification Stage Time, Telephone Number fields, and Duration of Alarms before Sending Notification. If you select No from the Staged Alarm Notification list, configure the Telephone Number field. After stage forwarding is enabled, an alarm will not be immediately forwarded upon generation. A forwarding takes place only if the alarm persists after the delay timer for forwarding expires.
- Telephone Number: You can add telephone numbers or select from telephone numbers of platform users.(Please input country code and area code as needed.)
- Concerned Resources:If you select All Resources, alarms of all the resources are forwarded. If you select Selected Devices, only alarms of the selected devices are forwarded.If you select Application Group, only the alarms of the selected application groups are forwarded. You can select devices in the following four ways:
- Selected Devices: Select one or multiple devices that are added into The System platform.
- Selected Custom View: Select a customized view, and all the devices in this view are selected.
- Selected Network Segment: Enter start and end IP addresses to select the devices whose IP addresses are in the address range.
- Concerned Port Groups: If you select All Ports, alarms of all the ports are forwarded. If you select Selected Port Group, only the alarms of the selected port groups are forwarded.
- Concerned Alarms: If you select All Alarms, all alarms are forwarded. If you select Selected Alarms, only the selected alarms are forwarded.
- Time Ranges: The system forwards alarms generated in the specified time range. For example, if you set 00:00-24:00 for a certain day, all alarms generated on the day are notified.
Precautions
- In a message notification configuration, the relationship among all conditions is AND.
- In a message notification configuration, the relationship among all alarm level conditions is OR.
- Application groups are supported only if the APM component is installed.
Related Topics